Choosing from Different Types of Trim and Moulding in Seattle

One of the most creative ways to put an accent into your walls is to use trim and moulding. This add-on looks amazing on walls, especially if you choose the right design. If you have an existing trim and moulding, but want to have more attractive pieces, you may want or need to have trim and moulding replacement in Seattle. The bits and pieces, although small, can create dramatic decoration on your walls. 

How do you know which type of trim and moulding to use? Check out the different types below and see if it will fit perfectly in the specific part of the house.

1. Crown Moulding – one of the most commmon types of mouldings, the crown molding is placed at the intersection of the wall and the ceiling. The molding may have 2 or several curvatures and designs, from simple to very delicate ones. It actually adds sophistication to the interior of the house.

2. Cove – cove is more like a crown molding, but it has a concave design in the middle, rather than the convex curve of the crown. Coves are often simpler than crowns. 

3. Casing – the casing can be used for doors and windows. Most households use matching casing for their doors and windows. If you want to use different designs, you can actually do so.

4. Baseboard – the baseboard is used to conceal any gaps between the wall and the floor base. When a baseboard is used, it actually gives you the impression of having taller walls and more spacious room. This is also often known as the base shoe molding.

5. Chair Moulding – this type of molding is used to protect the walls from furniture, specifically chairs. They may be used to protect the wall painting from cabinets, tables and others. 

6. Picture Moulding – this is usually a simple and rounded moulding used to support picture frames being placed on the wall of the house. 

7. Egg-and-Dart – this type of molding resembles the pillars from Greek architecture. They have vertical panels that run from the bottom to the top of the wall, where a decorative oval egg molding is placed on top. This adds a very attractive piece on the wall. This type is often used along with chair and crown moldings.

8. Board and Batten – these are also called wall panels. This type of molding is large and can cover half or even an entire wall section.

9. Bead and Pearls – these are probably the tiniest of all types of moldings. The beads and pearls actually look like and are the size of pearls. They are rounded and small and are placed in rows. They often exist with crown moldings and chair railings.

When you look for the right pieces for trim and moulding replacement in Seattle, be sure that you know what to use the pieces for. If you don’t know which ones to use, you can always ask your contractor and they can give you good suggestions about it. The trims and mouldings are often found in color white. However, you can choose to buy them in different colors to match with all the other decors at your home.

Typical Problems that Need Gutter Repair in Seattle

Rain gutters may not cover a huge part of your house, but they are one of the most functional elements in a roofing system. They may seem too simple to be given too much attention. However, they actually need regular maintenance more than you know. No matter how much to try to prevent gutter damages, some serious factors could destroy them. By this time, you will need services for gutter repair in Seattle. What are the common types of problems with gutters that will need professional repairs?

1. Piled up Debris – some debris from the environment may fall on your roof and slide down to the gutters. If the gutters don’t get regular cleaning, the debris may pool in and cause another problem. Cleaning the gutters may be something you can handle personally, but it would require the use of ladders that could be dangerous for beginners. Most households hire contractors to do the cleaning for them.

2. Clogged Gutters – this is a problem that is aggravated if the previous one is not managed very well. The debris could clog the gutters during rainy days. If that happens, the water may just flow over the gutters and not drain well to the downspouts. In worst cases, it causes damage to your home structure.

3. Gutter Leaks and holes – at times, there may be small leaks or holes in the gutters. The leaks can be patched up. The sooner you do the patching, the better. However, if you let it stay that way for a while, the patches may get bigger and cause you bigger problems.

4. Sagging Gutters – This is a common type of problem with gutters, especially if they have been on for a very long time. Bad weather may cause the gutters to sag, especially with strong winds or very heavy downpour. At times, the gutters don’t only sag. They are actually pulled away from the house. If you don’t fix gutters immediately, they could be dangerous as they could fall off any time and might hurt somebody.

5. Misaligned gutter pitches – the water from the gutters drain to the downspouts. In some cases, the gutters don’t align well to the downspout and cause overflowing over the edges of the gutters. Sometimes, you may not know that the gutters are poorly pitched to the spout. The water could just pool in the gutter even without clogs.

6. Poor downspout drains – while you check your gutters, you also have to check on the downspouts. Make sure they drain properly. If not, the water might seep into your basement and ruin your home structure. 

7. Gutter installation – there are houses that don’t have rain gutters at all. In this case, you will need a good hand to do the installation for you. Installation needs professional skills to make sure that the gutters and downspouts are placed in optimized spots around the house.

These are the common problems that need gutter repair in Seattle. If your house has one of those problems, you may need to call a contractor to fix the problems for you. They can be easily found over the internet. You may need to find general contractors in Seattle or just look directly for gutter repair service providers.